Fillable Shape Egg with Unicorn Features / Laser Cut Delights
The fillable design has 4 or 5 layers. The back is 3mm, the main drop in section is 18mm (you can now choose to have two of these to make the middle bigger for larger chocolates), then the acrylic is placed in front of that followed by a 3mm mdf front frame. All of these mdf sections are cut from high density mdf leaving a clean finish with very little work required on the 18mm due to it's high quality.
The 3mm is laser cut leaving the blackened edges, but the 18mm is mitre cut so it does not have the darkened edge.
The acrylic has a protective film which will need to be removed before use. The horn and ears are only on the front 3mm sections.
The front section will say Happy Easter if you do not wish to have a name.
All sections arrive seperate from each other leaving you to easily decorate each section, add vinyl etc...and then glue together. To remove the eggs the item will need to be gently tipped upside down.
The section where the chocolates sit is 18mm thick so the eggs tested so far are the Lindt eggs and Mini Kinder. However, none of the mini Cadburys eggs range fit as they are wider than 18mm.
We do not recommend putting any chocolates in that are not wrapped as any residue chocolate or shell that sticks inside will not be reachable once the item has been glued together.
Chocolates are not included, and if you choose no personalisation, the wording on the front will simply say HAPPY EASTER.