Quartz Clock Hands and Mechanisms 8cm / Laser Cut Delights
High quality quartz clock movement with sweep technology (very quiet running) also has built in hanging clip which can be removed with fine saw or sharp craft knife to reduce to 5.5cm if required.
Height 7cm (including hanger)
Depth 1.6cm (not including spindle)
Short Spindle is designed for our 3mm thick clock faces
Medium Spindle is designed for our 6mm thick clock faces
Long Spindle is designe for up to 9mm thick clock faces
This listing is for the 8cm Hands which are best for 30 or 40cm faces and you will receive a random red, white or black set of hands. Colours cannot be chosen unfortunately.
Choose the hands you prefer. The hand length refers to the distance between the center of the spindle and the tip of the minute hand.
Requires a single AA battery (NOT INCLUDED)
Remove the nut and gold washer from the mechanism but leave the black one on. Place your clock on to the mechanism and replace the gold washer first followed by the nut. Then first place the HOUR hand on and make sure it is all the way down, then the MINUTE hand and then the second had goes on at the end.